Bus 2×1,5mm²


Flat cable Bus 2×1,5mm² HF

129767_p_high.jpg 129768_p_high.jpg
  • The system meets the relevant national and international standards for electrical installation
  • Mechanically and color coded to ensure safe connections
  • Order.no.: 129768
  • Designation: 49948
  • Brand: Enequi

A flat cable system fits most applications where flexibility is needed, offices, schools, warehouses, hospitals, garages and more. With a flat cable as back bone, the amount of cable used will be drastically reduced and thus also the fire hazard decrease. When planning, no tap-off points are need directly and planning and installation will not be sensitive to changes. The possibility of putting the tap-off wherever needed or moving existing tap-offs enable change during construction or remodelling and renovation. Installation of tap-offs on the flat cable can also be done elsewhere and then roll out the assembled cable on site. A major advantage of flat cable is that there is almost no voltage drop across the tap-off points. Without the continuous interruptions of the cable in the junction boxes you also minimize the risk of errors. The flat cable has an asymmetrical shape that makes it impossible to place tap-offs wrong and thus ensures a safe installation.

Nominal cross section conductor 1.5 mm²
Core insulation material Polyethylene (PE)
Nominal voltage U 50 V
Colour outer sheath Grey
Material outer sheath Polyolefin
Permitted cable outer temperature during assembling/handling 70 – -15 °C
Nominal voltage U0 50 V
Screen 1
Number of cores 2
Cable width approx. 11 mm
Cable height approx. 6 mm
Halogen free (acc. EN 60754-1/2) 1

Related products